While Playing - Sony MZ-B10 Operating Instructions (primary manual) Operating Instructions Manual

While playing

Symptom
An MD is not
played normally.
An MD is not
played from the
first track.
Playback sound
skips.
Sound has a lot of
static.
The volume of the
recorded track is
low.
No sound comes
through the
headphones/
earphones.
The recorder skips
several tracks
ahead or behind
whenever you
press the . •
REVIEW • AMS
or > • CUE •
AMS button.
The edited tracks
may exhibit sound
dropout during
search operations.
50
Cause/Remedy
• Repeat play is selected.
, Change back to the normal play (page 27).
• Playback mode is changed.
, Change back to the normal play (page 27).
• Disc playing stopped before it came to the last track.
, Press N • PLAY for 2 seconds or more to start playing.
• The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
• A very short track may cause sound to skip.
, Try not to create a track under one second long.
• Strong magnetism from a television or such device is interfering
with operation.
, Move the recorder away from the source of strong magnetism.
• The track was recorded in analog mode (in digital mode, the
recording level is automatically set to the same level as that of the
sound source). Or you used a connecting cord with an attenuator
(such as an optional RK-G128, RK-G134, etc.) .
, Use a correct connecting cord (such as RK-G129, RK-G136,
etc.).
• The headphones/earphones plug is not firmly connected.
, Plug in the plug of the headphones/earphones firmly to the i
jack.
• The plug is dirty.
, Clean the plug.
• The GROUP button has been pressed and
display.
, The recorder returns to normal if no operation is made for 5
seconds.
• This occurs due to the MiniDisc system limitation. The
fragmentation of data may cause sound dropout while searching
because the tracks are played in higher speed than normal
playback.
is flashing in the