Preparing A Power Source - Sony MZ-B10 Operating Instructions (primary manual) Operating Instructions Manual

Preparing a power source

This section explains how to prepare the recorder for battery-powered
operation. For information on connecting the recorder to an AC power
outlet, see page 43.
1
Insert dry batteries.
Back of the recorder
Press and slide the battery
compartment lid as shown in
the illustration.
Notes
• Do not use manganese dry battery. If you do, recording may not be possible.
• Insert the e and E poles of the battery correctly as shown on the recorder.
• Check that the REC button is not depressed before inserting the alkaline dry
batteries. If a disc is inserted and the button is depressed, recording may start when
you insert the alkaline dry batteries. If the REC button is depressed, be sure to
remove the disc before you insert the batteries.
2
Unlock the control.
12
Insert two LR6 (size AA)
alkaline dry batteries
(supplied with the world
model only).
HOLD
Close the lid.
Slide HOLD to the opposite
direction of the arrow on the
recorder.