Creating A New Group When Recording; To Select Microphone Sensitivity - Sony MZ-B10 Operating Instructions (primary manual) Operating Instructions Manual

Creating a new group when
recording
By pressing REC, you can set the recorder
to create a new group automatically each
time you record. This is convenient when
recording several CDs in succession.
. • REVIEW •
AMS, > • CUE
• AMS
1
While the recorder is stopped, enter
the menu and select "REC SET" -
" : REC".
2
Select " : REC ON".
To turn the setting to normal
Select " : REC OFF"
MENU/
ENTER
To select microphone
sensitivity
. • REVIEW •
AMS, > • CUE
• AMS
1
Enter the menu and select "REC
SET" - "MIC SENS".
2
Select "SENS HIGH" or "SENS
LOW".
SENS HIGH (factory setting): Use
this setting when recording soft or
normal volume sounds (such as
conversations).
SENS LOW: Use this setting when
recording loud sounds or sound at
close range (such as a narration or a
music concert, etc.)
MENU/
ENTER
39