Starting An Operation Quickly (Quick Mode); Using An Optional Foot Control Unit - Sony MZ-B10 Operating Instructions (primary manual) Operating Instructions Manual

Starting an operation quickly
(Quick Mode)
Playback starts quickly after pushing the
playback button or cueing to a track, or an
internal recorder operation starts quickly
(such as writting data after stopping a
recording operation).
. • REVIEW •
AMS, > • CUE
• AMS
1
Enter the menu and select "OPTION"
- "PowerMode".
2
Select "QUICK".
To switch back to the normal
setting
Select "NORMAL".
Notes
• When the power mode is set to "QUICK", the
power remains on within the recorder even
when nothing appears in the display. This
leads to a shorter battery life. The shortened
battery life for each recording mode is as
follows:
Recording
mode
SP
LP2
LP4
Monaural
• If no recorder operation (including opening or
closing of the lid) occurs for one hour, the
recorder turns off. For this reason, the next
time you start playback or do another
operation, the recorder will not respond
quickly. The unit, however, will return to
quick mode afterwards.
40
MENU/
ENTER
Approx. battery life
(when recording)
15 hours
17 hours
18 hours
17 hours
Using an optional foot control
unit
If you connect the optional foot control
unit (FS-85B50) to the i jack on the
recorder, you can use your foot to start or
pause playback. If you use the foot
control unit, set the recorder for foot
control use.
. • REVIEW •
AMS, > • CUE
• AMS
To i
Foot control
unit (not
supplied)
1
Enter the menu and select "OPTION"
- "FOOT SW".
2
Select "SW ON".
Note
The recorder is factory set to "SW ON".
MENU/
ENTER