Advertisement
Check the position of the last punched hole.
Standard Values (mm)
If Y is incorrect, replace the punch unit.
If X is incorrect, change the value of SP6504 as shown on the
following slide.
Slide 82
No additional notes
Adjusting SP6504 if the Hole
Position is Incorrect - 1
X: 8.8 (A4), 12.7 (LT)
Y: 6 (A4), 6 (LT)
X1: 5.625 (A4), 9.52 (LT)
82
D392 Ring Binder Training
Advertisement
