Advertisement
Adjust this SP after you replace one or more of the following
items:
Binder unit control board
Ring binder main board
Pre-punch jogger unit
Pre-punch jogger HP sensor (S301)
Multiply the value on the decal by "0.1". For example, if the value
is "-19" then input –1.9.
Do a run with the ring binder in the punch only mode (no ring
binding). Use paper in the weight range 70 to 90 g/m
Slide 81
SP6504-1 (A4 LEF) or SP6504-2 (LT LEF)
SP6504
81
D392 Ring Binder Training
2
.
Advertisement
