Advertisement
Clamping Before Binding
The guide clamps hold the spine of the document before binding.
The clamp motor moves the upper clamp guide through a cam.
The rotation of the cam is controlled by the clamp HP sensor. The
clamp upper guide normally remains away from the bearing of the
clamp upper arm.
During ring binding, the stack is held only at the spine.
Slide 58
During clamping, the upper and lower clamps are held closed by large springs.
The clamp binder motor pulls the pre-bind jogger, with the clamped stack, into
the ring binder. We will see this in the next section.
Clamp
Motor
58
D392 Ring Binder Training
Upper
Clamp
Lower
Clamp
Advertisement
