Preconditions - Siemens SINAMICS S120 System Manual

Commissioning

7.2 Preconditions

7.2 Preconditions
Hardware
● Control Unit CU320-2 PN or CU320-2 DP
● Active Line Module, booksize format with article number ...AA3 or chassis format with
article number ...AA4 with associated Active Interface Module
● Application-dependent number of Voltage Sensing Modules (VSM10) to measure
voltages
● DC voltage supply for the DC link, e.g. Motor Module, for rotating power generation using
a generator, or battery
Software
● STARTER with Version 4.4 or higher
SSP for SINAMICS V4.7
● SINAMICS S120 firmware version 4.7 or higher
● Memory card for CU320-2 with one of the options:
– Booksize device:
– Chassis format devices:
Hardware to be supplied on-site
● Transformer
● Line contactor
● Generator
68
Licensing corresponding to the power rating and application
S01: Dynamic grid support for feeding power into a power grid
S02: Grid control for feeding power into an island grid
System Manual, 04/2015, A5E03347436A
Grid infeed