Aiwa CX-ZR774 Operating Instructions Manual page 6

To
stand the
AM antenna on a surface
Fix the claw to the slot.
*,8$
b
-a
To position the antennas
FM feeder antenna:
. . . . . . .. ...,,,
,+;
,,,, ,.
,,,,,,
Extend the antenna horizontally in a T-shape and fix its ends to
a wall.
AM loop antenna:
Position to find the best reception.
m
Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in
SPEAKERS
terminals.
Do not leave objects generating magnetism, such as credit
cards, near the speakers, as the objects may be damaged.
Do not position the FM antenna near metal objects or curtain
rails.
Do not position the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, as
interference will occur.
Do not unwind the AM antenna wire.
Standard positioning
~ Front speakers
@ Surround speakers
Place the surround speakers behind the listening area.
To mount the surround speakers on the wall
Carefully mount the surround speakers so that the speakers are
firmly secured.
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to FM 75 Q terminals.
To connect other optional equipment+ page 24.
I
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
6
ENGLISH