Aiwa CX-ZR774 Operating Instructions Manual page 17

Preparation
Set the tape to the point where recording will start.
Note that recording will be done
on one side of the tape only.
1
2
3
4
Press TAPIE.
insert the original tape into Deck 1 and the tape
to be recorded on into Deck 2.
Insert
the tapes with the sides to be played back or recorded
on first facing out from the unit.
Press TAPE/DECK 1/2 to select Deck 1.
'L"TP1" is displayed.
F%ss Rl=C/REC MUTE to start recording.
Playing and recording start simultaneously.
To stop dubbing
Press .
This function allows you to make exact copies of the original
tape.
m
Dubbing does not start from a point halfway in the tape.
Note that recording will be done on one side of the tape only.
1 Press TAPE.
2 Insert the original tape into Deck 1 and the tape
to be recorded on into Deck 2.
Insert each tape with the side to be played back or recorded
on first facing out from the unit.
3 Press SYNC DUB to start recording,
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press .
m
Recording is inhibited if the erasure presentation tab for the side
of the tape facing out from the unit is broken off.
ENGLISH ~
7