FortiMail-5001A hardware installation
FortiMail-5001A hardware installation
FortiMail™ Secure Messaging PlatformVersion 4.0 Patch 1Install Guide
Revision 2
http://docs.fortinet.com/
•
Feedback
Before use, the FortiMail board must be correctly inserted into an Advanced
Telecommunications Computing Architecture (ACTA) chassis such as the FortiGate-5140,
FortiGate-5050, or FortiGate-5020 chassis.
Before inserting the board into a chassis you should make sure the SW-11 switch is set
correctly.
This section describes:
•
Changing FortiMail SW11 switch settings
•
FortiMail mounting components
•
Inserting a FortiMail board
•
Removing a FortiMail board
•
Resetting a FortiMail board
•
Troubleshooting
53