Http://Docs.fortinet.com - Fortinet FortiMail-100 Install Manual

Mounting the FortiMail unit
Disassembling the slide rail
24
The slide rail assembly has two moving rails within the housing. You need to remove the
innermost rail. This rail will attach to the sides of the FortiMail unit.
Figure 4: FortiMail side rail
Rail housing
To remove the side rail
1 Open the slide rails package and remove the rails.
2 Extend the slide rail and locate the slide rail lock.
3 Push down on the lock while pulling the rail completely out of the slide rail assembly.
4 Repeat these steps for the other slide rail assembly.
You will attach this part to the side of the FortiMail unit.
FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide
Hardware installation
Sliding Rail
Rail Lock
Revision 2

http://docs.fortinet.com/

• Feedback