2006-08 ENGINE Mechanical - Overhaul - 2.0L (LF) & 2.3L (L3) - Mazda6 & MX-5 Miata
single unit.
Connecting rod side clearance (Standard)
0.14-0.36 mm {0.0056-0.0141 in}
Connecting rod side clearance (Maximum)
0.435 mm {0.0172 in}
Fig. 55: Measuring Connecting Rod Large End Side Clearance
Courtesy of MAZDA MOTORS CORP.
3. Remove the connecting rod cap.
4. Position plastigage atop the journals in the axial direction.
5. Install the connecting rod bearing and connecting rod cap. (See CONNECTING ROD CAP
ASSEMBLY NOTE).
6. Remove the connecting rod cap.
7. Measure the connecting rod oil clearance.
If it exceeds the specification, replace the connecting rod bearing or grind the crank pin and use
oversize bearings so that the specified clearance is obtained.
Connecting rod bearing oil clearance (Standard)
2007 Mazda MX-5 Miata Sport