2006-08 ENGINE Mechanical - Overhaul - 2.0L (LF) & 2.3L (L3) - Mazda6 & MX-5 Miata
Fig. 59: Identifying Coil Control Valve Connector Terminals
Courtesy of MAZDA MOTORS CORP.
Spool Valve Operation Inspection
1. Disconnect the negative battery cable.
2. Remove the oil control valve (OCV).
3. Verify that the spool valve in the oil control valve (OCV) is in the maximum valve timing retard position
as indicated in the figure.
If it exceeds the specification, replace the oil control valve (OCV).
4. Verify that the battery is fully charged.
If it is less than specification, recharge the battery.
2007 Mazda MX-5 Miata Sport