Mazda MX-5 Miata Sport 2007 Manual page 201

2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
6. Press the UNLOCK button on card key 2.
7. From the ignition switch in the ON position, switch the ignition switch in the order indicated below.
ACC-->ON-->ACC-->ON-->ACC-->ON

8. Open the driver-side front door, press the door switch twice , and then close the door.
NOTE:
9. Press the UNLOCK button on the unprogrammed card key twice.
NOTE:
10. If programming more card keys, remove the supplementary key once, and then repeat the procedure from
Step 2.
USING M-MDS
1. Fully lower the driver-side door glass.
2. Connect the M-MDS to the DLC-2.
3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
CAUTION:
Fig. 42: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
2007 Mazda MX-5 Miata Sport
After Step 3 is completed and the card key programming mode is

activated, the door lock actuator operates to lock, and then operates
to unlock.
If the door lock actuator does not operate, repeat the procedure from

Step 2.
After Step 8 is completed and the card key is programmed, the door

lock actuator operates to lock, and then operates to unlock.
Protect the cable and body contact area with a clean rag,

otherwise they could be damaged.