Figure 3-24. Installing a Hard Drive (Half-Height Blade Shown)
1
hard drive carrier
3
hard drive bay 1
2 Insert the hard-drive carrier into the drive bay.
3 Close the hard-drive carrier handle to lock it in place.
Removing a Hard Drive
NOTICE:
Not all operating systems support hot-plug drive installation. See the
documentation supplied with your operating system.
1 Take the hard drive offline and wait until the hard-drive indicator codes on
the drive carrier signal that the drive may be removed safely. See
Figure 1-8.
When all indicators are off, the drive is ready for removal.
1
2
4
Installing Blade Components
4
hard drive bay 0
carrier handle
2
3
143