Powerconnect M6220 Ethernet Switch Module - Dell PowerEdge M605 Hardware Owner's Manual

Table 1-14. Cisco SFS M7000e Infiniband Switch Indicators
Indicator Type Pattern
Infiniband Off
port status
indicator
Green flickering
Green on
Module status Off
indicator
Blue on
Amber on or
blinking
Module power Off
indicator
Green

PowerConnect M6220 Ethernet Switch Module

The PowerConnect M6220 Ethernet switch module includes four external
10/100/1000 Mbps Ethernet connectors and one USB type A form factor serial
connector. See Figure 1-19.
Two option bays support the following three module options:
• A resilient stacking module with 2 x 24 Gb stacking ports
• A 10 Gb Ethernet module with two 10 Gb optical XFP connectors
• A 10 Gb Ethernet module with two copper CX4 uplinks.
Installing two option modules provides additional stacking and redundancy
support. Sixteen internal Gb Ethernet connectors link to the blades in the
enclosure.
For additional information about the PowerConnect M6220 Ethernet switch
module, see the documentation that shipped with the module. For general
information on installing this module, see "I/O Modules" on page 166.
54
About Your System
Description
Link error or Subnet Manager not operating
I/O activity on port
Link established
Switch is not ready
Switch operating normally
Fault condition in module
Power to the module is off
Module has power