Dell PowerEdge M605 Hardware Owner's Manual page 208

Table 7-5. PowerEdge M905 System Board Connectors (continued)
Connector
6 D1 – D4
7 CPU4
8 C1 – C4
9 PSWD_EN,
NVRAM_CLR
10
11 J_STORAGE
12
13
14 CPU3
15 CPU1
16 A1 – A8
17
18 MEZZ1_FAB_C
19 MEZZ2_FAB_B
20 MEZZ3_FAB_C
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
"Glossary" on page 219.
208
System Board Information
Description
memory modules D1 – D4
Processor 4 socket
memory modules C1 – C4
system configuration jumpers
NOTE:
Access requires removal of system board. See
"Removing the System Board" on page 150.
connector for the 3.0-V coin battery
NOTE:
Access requires removal of system board. See
"Removing the System Board" on page 150.
Storage controller card connector
Hard-drive backplane connector
Hardware key socket for integrated NIC TOE/iSCSI
feature
Processor 3 socket
Processor 1 socket
memory modules A1 – A8
video controller card connector
Mezzanine card connector 1 Fabric C
Mezzanine card connector 2 Fabric B
Mezzanine card connector 3 Fabric C