Using The Advanced Testing Options - Dell PowerEdge M605 Hardware Owner's Manual

Table 6-1. System Diagnostics Testing Options (continued)
Testing Option
Advanced Testing
Information and Results
Program Options
Device Configuration
Exit to MS-DOS

Using the Advanced Testing Options

When you select Advanced Testing from the Diagnostics menu, the main
screen of the diagnostics appears and displays the following information:
• Two lines at the top of the screen identify the diagnostics utility, the
version number, and the system's service tag number.
• The left side of the screen under Device Groups lists the diagnostic device
groups in the order that they are tested if you select All under the Run
Tests submenu. Press the up- or down-arrow keys to highlight a particular
device group. Press the left- or right-arrow keys to select the options on the
menu. As you move from one menu option to another, a brief explanation
of the highlighted option appears at the bottom of the screen.
• The right side of the screen under Devices for Highlighted Group lists the
specific devices within a particular test group.
• The menu area consists of two lines at the bottom of the screen. The first
line lists the menu options that you can select; press the left- or right-arrow
key to highlight an option. The second line provides information about the
highlighted option.
For more information about a device group or device, highlight the Help
option and press <Enter>. Press <Esc> to return to the previous screen.
200
Running System Diagnostics
Function
Checks a particular area of the blade.
Displays test results.
Sets various test parameters.
Displays an overview of the devices in the blade.
Exits the diagnostics and returns to the System Utilities
menu.