Warning Messages - Dell PowerEdge M605 Hardware Owner's Manual

Table 1-18. Blade Messages (continued)
Message
Warning: The
current memory
configuration is
not optimal. For
more information
on valid memory
configurations,
please see the
Hardware Owner'
Manual on the
technical support
site.
Write fault.
Write fault on
selected drive.

Warning Messages

A warning message alerts you to a possible problem and prompts you to
respond before the system continues a task. For example, before you format a
diskette, a message will warn you that you may lose all data on the diskette.
Warning messages usually interrupt the task and require you to respond by
typing (yes) or
y
NOTE:
Warning messages are generated by either the application or the operating
system. For more information, see the documentation that accompanied the
operating system or application.
Causes
There is no memory
configuration error, but
the memory configuration
is not recommended by
Dell.
Faulty diskette, diskette
drive, or optical drive.
(no).
n
Corrective Actions
See "System Memory" on
page 105.
Replace the diskette. Ensure
that the drive cable is
properly connected. See
"Troubleshooting USB
Devices" on page 183 or
"Troubleshooting Hard
Drives" on page 192 for the
appropriate drive(s)
installed in your system.
About Your System
77