Table of Contents
Advertisement
Using the Web Pages to Configure the SMX
The switcher settings can be configured via LAN /WAN web
pages using a suitable Internet browser (Internet Explorer
Firefox
To view and configure the switcher via Web pages:
1.
2.
N
The browser opens the SMX Matrix Switcher Series Default
Web Page (see screen shot), at the System Status page.
SMX default Web page — system status
There are three other pages, the Configuration page, the File
Management page, and Control page. Any of these pages can
accessed by clicking on the applicable tab.
Status page
This page allows the user to monitor the system. Settings shown
are not configurable from this page.
Click in the left column to access System Status, Physical
Configuration, and DSVP pages.
SMX System MultiMatrix Switchers
Also refer to the SMX MultiMatrix Switchers User's Manual at www.extron.com.
).
®
If not already done, connect the SMX to a PC using the rear
panel RJ-45 LAN connector.
Open the Internet browser on the host computer, and in
the address bar type the IP address for the SMX switcher.
The default IP address is 192.168.254.254. Check with
the administrator if the IP address has been changed.
• Configuration and Control
,
®
5-5
Advertisement
Table of Contents
