Mitsubishi LE-40MTB-E Instruction Manual page 52

6. Linking the contact devices
• From the Programmable controller to the LE - 40MTB-E
By turning on and off the internal contacts M800 to M806 on the programmable controller side, the
contact command inputs MC1 to MC6 in the LE-40MTB-E can be operated. The OR command is
entered in the input terminals in the LE-40MTB-E. The M807 is used to transfer the data devices.
• From the LE-40MTB-E to the programmable controller
By monitoring the internal contacts M900 to M906 on the programmable controller side, the I /O
status of the contacts in the LE-40MTB-E can be monitored. The M907 is used to transfer the data
devices.
Device No.
M800
M801
M802
M803
M804
M805
M806
M807
( Example of program )
M8000
X000
M906
Set item
MC1
MC2
MC3
MC4
MC5
MC6
MANUAL/AUTO
Sending to word
data is completed.
[ M8070 ] Master station
( M800 ) Operation is started when X0 is turn ON (MC1=ON).
Emergency stop occurs when ZT is turned
( Y000 )
ON.
48
Device No. Monitor item
M900 MC1
M901 MC2
M902 MC3
M903 MC4
M904 MC5
M905 MC6
M906 ZT
Sending to word
M907
data is completed.