Tumble Generator Valve Assembly - Subaru Impreza 2003 Service Manual

14.Tumble Generator Valve As-
sembly
A: REMOVAL
NOTE:
This component is installed to except STi model.
1) Release the fuel
FU(H4DOTC)-53, RELEASING OF FUEL PRES-
SURE, OPERATION, Fuel.>
2) Open the fuel filler flap lid, and then remove the
fuel filler cap.
3) Disconnect the ground cable from battery.
4) Remove the intake
FU(H4DOTC)-14, REMOVAL, Intake Manifold.>
5) Disconnect the connector from tumble generator
valve sensor.
6) Disconnect the connector from tumble generator
valve actuator.
7) Remove the fuel
FU(H4DOTC)-37, REMOVAL, Fuel Injector.>

TUMBLE GENERATOR VALVE ASSEMBLY

pressure. <Ref.
FU-00009
manifold. <Ref.
FU-00617
FU-00616
injector. <Ref.
FU(H4DOTC)-41
8) Remove the tumble generator valve body from
intake manifold.
to
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Always use new gaskets.
Tightening torque:
8.25 N·m (0.84 kgf-m, 6.1 ft-lb)
to
to
FUEL INJECTION (FUEL SYSTEMS)
FU-00053
FU-00053