Renault Laguna III Manual page 130

ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine - gearbox assembly: Removal - Refitting
K9K
a Move aside the expansion bottle using the lugs (22) .
a Disconnect the following connectors:
- (24) from the air conditioning pressostat,
- the fan assembly,
- the fan assembly resistor,
- the diesel heater,
- on the diesel filter mounting.
a Unpick the wiring:
- from the air conditioning pressostat,
- the fan assembly,
- the fan assembly resistor,
- the diesel heater,
- on the diesel filter mounting.
a Move aside the fan assembly wiring.
a Remove:
- the front left-hand wheel driveshaft (see Front left-
hand driveshaft: Removal - Refitting) (29A,
Driveshafts),
- the front right-hand wheel driveshaft (see Front
right-hand driveshaft: Removal - Refitting)
(29A, Driveshafts),
- the differential output seals (see Differential out-
put seal: Removal - Refitting) (21A, Manual gear-
box),
- the radiator mounting cross member (see Radiator
mounting cross member: Removal - Refitting)
123181
(41A, Front lower structure).
a Remove:
123479
- the bolts (25) from the lower engine tie-bar,
- the lower engine tie-bar.
10A-53
10A
123787