Table of Contents
Advertisement
grizzly.com
367 x 53.5mm
504
G0793
167.5 x 44.5mm
503
G0793 Machine Labels C
• 1:1 Sizing (Labels are
actual size)
(12/05/14)
• Labels must be made of
chemical-resistant material
G0793 Machine Labels A
• 1:1 Sizing (Labels are
(12/05/14)
• Labels must be made of
7
MODEL G0793
HEAVY-DUTY DRILL PRESS
6
w/AUTO DOWNFEED & TAPPING
Specifications
5
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
To reduce the risk of serious injury when using this machine:
Full-Load Current Rating: 6.6A
1. Read and understand owner's manual before operating.
Motor Speeds: 875 & 1725 RPM
2. Always wear approved safety glasses.
Swing: 27.5"
4
3. Only plug power cord into a grounded outlet.
Max. Distance Spindle to Column: 13-3/4"
4. Disconnect power before setting up or servicing.
Max. Distance Spindle to Table: 30-3/4"
5. Avoid entanglement with spindle—tie back long hair, roll up long
Spindle Taper: MT#4
Spindle Travel: 7"
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
3
Number of Spindle Speeds: 18
6. Properly set up machine before starting.
Spindle Speed Range: 60 – 1740 RPM
7. Keep all guards and covers in place during operation.
Vertical Table Travel: 20"
8. Clamp workpiece to table to prevent rotation.
Table Swivel Around Column: 360˚
2
9. Avoid positioning hands where they could slip into rotating bits.
Drilling Capacity Cast Iron: 1-1/2" Dia.
10. Always remove chuck keys and other tools before starting.
Drilling Capacity Steel: 1-3/16" Dia.
11. Never attempt to slow or stop spindle with hands or tools.
Weight: 1026 lbs.
12. Use correct speeds for drilling accessories and workpiece.
Date
1
13. Do not operate when tired or under influence of drugs or alcohol.
Spindle
Spindle
14. Do not expose to rain or use in wet locations.
Stop
Start
S/N
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
0
in
358 x 170mm
Fluid Capacities
Component
Capacity
Type
NOTICE
Gearhead
4-3/4 qt.
Grizzly T23963 or ISO 32 Equivalent
Do not change spindle speed or
direction when spindle is in motion.
Coolant
9-1/2 qt.
Varies per Operation/Material
23.5 x 97mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
32 x 35.5mm
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
WARNING!
WARNING!
WARNING!
To reduce risk of death
BIOLOGICAL AND
ENTANGLEMENT
EYE/FACE INJURY
or serious injury, read
HAZARD!
HAZARD!
POISON HAZARD!
manual BEFORE using
Always wear
Tie back long hair, roll up
Use personal protection
machine.
ANSI-approved safety
long sleeves, and remove
when handling coolant.
glasses and face shield
loose clothing, jewelry, or
To get a new manual,
Immediately clean up
when using this
gloves to prevent getting
call (800) 523-4777 or
spills.
machine.
caught in moving parts.
go to www.grizzly.com.
63 x 38mm
COLOR CODES
NOTICE
DANGER
WARNING
Do not exceed gearbox oil level
CAUTION
above red dot in center of oil
NOTICE
site glass below.
GRIZZLY LOGO RED
34.5 x 80mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0793
501
grizzly.com
REF PART #
DESCRIPTION
501
P0793501 GRIZZLY.COM LABEL
502
P0793502 STOP OIL FILL TAG
503
P0793503 CONTROL PANEL FACEPLATE
504
P0793504 MODEL NUMBER LABEL
505
P0793505 FLUID CAPACITIES LABEL
506
P0793506 OIL LEVEL NOTICE
BUY PARTS ONLINE AT GRIZZLY.COM!
-54-
Scan QR code to visit our Parts Store.
Labels & Cosmetics
505
Fluid Capacities
Component
Capacity
Gearhead
4-3/4 qt.
Coolant
9-1/2 qt.
23.5 x 97mm
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
63 x 38mm
NOTICE
actual size)
chemical-resistant material
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
105.5 x 166mm
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
502
CHECK OIL
LEVELS BEFORE USING!
WARNING!
BIOLOGICAL AND
EYE/FACE INJURY
REFER TO
OWNER'S MANUAL
POISON HAZARD!
Always wear
FOR OIL TYPE AND
Use personal protection
ANSI-approved safety
AMOUNT.
when handling coolant.
glasses and face shield
Immediately clean up
when using this
spills.
machine.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
artwork changes are required, contact us immediately at manuals@grizzly.com
FOR GRIZZLY MACHINES ONLY!
64.5 x 148mm
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
PANTONE 109 C
PANTONE 3005 C or RAL 5005
PANTONE 711C or RAL 3020
If
367 x 53.5mm
167.5 x 44.5mm
S/N
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
WARNING!
WARNING!
BIOLOGICAL AND
EYE/FACE INJURY
ENTANGLEMENT
54 x 54mm
HAZARD!
POISON HAZARD!
HAZARD!
17 x 19mm
G0793 Machine Labels A
Always wear
Tie back long hair, roll up
• 1:1 Sizing (Labels are
Use personal protection
ANSI-approved safety
long sleeves, and remove
Type
when handling coolant.
glasses and face shield
loose clothing, jewelry, or
actual size)
CHECK OIL
Immediately clean up
Grizzly T23963 or ISO 32 Equivalent
when using this
gloves to prevent getting
LEVELS BEFORE USING!
(12/05/14)
spills.
• Labels must be made of
machine.
caught in moving parts.
Varies per Operation/Material
506
chemical-resistant material
63 x 38mm
NOTICE
32 x 35.5mm
MODEL G0793
REFER TO
OWNER'S MANUAL
HEAVY-DUTY DRILL PRESS
FOR OIL TYPE AND
G0793 Machine Labels A
Do not exceed gearbox oil level
AMOUNT.
w/AUTO DOWNFEED & TAPPING
above red dot in center of oil
G0793 Machine Labels A
(12/05/14)
Specifications
site glass below.
GRIZZLY LOGO RED
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
(12/05/14)
To reduce the risk of serious injury when using this machine:
34.5 x 80mm
Full-Load Current Rating: 6.6A
1. Read and understand owner's manual before operating.
507
Motor Speeds: 875 & 1725 RPM
2. Always wear approved safety glasses.
MODEL G0793
Swing: 27.5"
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
3. Only plug power cord into a grounded outlet.
Max. Distance Spindle to Column: 13-3/4"
HEAVY-DUTY DRILL PRESS
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
4. Disconnect power before setting up or servicing.
Max. Distance Spindle to Table: 30-3/4"
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
5. Avoid entanglement with spindle—tie back long hair, roll up long
w/AUTO DOWNFEED & TAPPING
Spindle Taper: MT#4
WARNING!
WARNING!
MODEL G0793
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Spindle Travel: 7"
artwork changes are required, contact us immediately at manuals@grizzly.com.
Number of Spindle Speeds: 18
6. Properly set up machine before starting.
To reduce risk of death
EYE/FACE INJURY
ENTANGLEMENT
Specifications
HEAVY-DUTY DRILL PRESS
or serious injury, read
Spindle Speed Range: 60 – 1740 RPM
HAZARD!
HAZARD!
7. Keep all guards and covers in place during operation.
manual BEFORE using
Vertical Table Travel: 20"
Tie back long hair, roll up
Always wear
8. Clamp workpiece to table to prevent rotation.
w/AUTO DOWNFEED & TAPPING
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
machine.
To reduce the risk of serious injury when using this machine:
ANSI-approved safety
Table Swivel Around Column: 360˚
long sleeves, and remove
Full-Load Current Rating: 6.6A
9. Avoid positioning hands where they could slip into rotating bits.
1. Read and understand owner's manual before operating.
glasses and face shield
Drilling Capacity Cast Iron: 1-1/2" Dia.
loose clothing, jewelry, or
To get a new manual,
Motor Speeds: 875 & 1725 RPM
10. Always remove chuck keys and other tools before starting.
2. Always wear approved safety glasses.
Drilling Capacity Steel: 1-3/16" Dia.
when using this
gloves to prevent getting
Specifications
call (800) 523-4777 or
Swing: 27.5"
11. Never attempt to slow or stop spindle with hands or tools.
3. Only plug power cord into a grounded outlet.
machine.
Weight: 1026 lbs.
caught in moving parts.
go to www.grizzly.com.
Max. Distance Spindle to Column: 13-3/4"
4. Disconnect power before setting up or servicing.
12. Use correct speeds for drilling accessories and workpiece.
Max. Distance Spindle to Table: 30-3/4"
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
Date
To reduce the risk of serious injury when using this machine:
5. Avoid entanglement with spindle—tie back long hair, roll up long
Spindle Taper: MT#4
13. Do not operate when tired or under influence of drugs or alcohol.
64.5 x 148mm
Full-Load Current Rating: 6.6A
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Spindle Travel: 7"
COLOR CODES
1. Read and understand owner's manual before operating.
14. Do not expose to rain or use in wet locations.
Number of Spindle Speeds: 18
Motor Speeds: 875 & 1725 RPM
6. Properly set up machine before starting.
S/N
2. Always wear approved safety glasses.
15. Prevent unauthorized use by children or untrained users;
Spindle Speed Range: 60 – 1740 RPM
Swing: 27.5"
7. Keep all guards and covers in place during operation.
3. Only plug power cord into a grounded outlet.
To reduce the risk of serious injury when using this machine:
restrict access or disable machine when unattended.
Vertical Table Travel: 20"
DANGER
PANTONE 485 C or RAL 3001
Max. Distance Spindle to Column: 13-3/4"
8. Clamp workpiece to table to prevent rotation.
Table Swivel Around Column: 360˚
4. Disconnect power before setting up or servicing.
1. Read and understand owner's manual before operating.
Max. Distance Spindle to Table: 30-3/4"
9. Avoid positioning hands where they could slip into rotating bits.
Drilling Capacity Cast Iron: 1-1/2" Dia.
2. Always wear approved safety glasses.
5. Avoid entanglement with spindle—tie back long hair, roll up long
Spindle Taper: MT#4
WARNING
G0793 Machine Labels A
PANTONE 151 C or RAL 2005
10. Always remove chuck keys and other tools before starting.
Drilling Capacity Steel: 1-3/16" Dia.
3. Only plug power cord into a grounded outlet.
Spindle Travel: 7"
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
11. Never attempt to slow or stop spindle with hands or tools.
Weight: 1026 lbs.
Fluid Capacities
Number of Spindle Speeds: 18
6. Properly set up machine before starting.
17 x 19mm
12. Use correct speeds for drilling accessories and workpiece.
4. Disconnect power before setting up or servicing.
CAUTION
PANTONE 109 C
Spindle Speed Range: 60 – 1740 RPM
Date
5. Avoid entanglement with spindle—tie back long hair, roll up long
7. Keep all guards and covers in place during operation.
13. Do not operate when tired or under influence of drugs or alcohol.
(12/05/14)
Component
Capacity
Vertical Table Travel: 20"
Type
14. Do not expose to rain or use in wet locations.
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
NOTICE
PANTONE 3005 C or RAL 5005
8. Clamp workpiece to table to prevent rotation.
Table Swivel Around Column: 360˚
S/N
Gearhead
4-3/4 qt.
Grizzly T23963 or ISO 32 Equivalent
15. Prevent unauthorized use by children or untrained users;
9. Avoid positioning hands where they could slip into rotating bits.
6. Properly set up machine before starting.
LEVELS BEFORE USING!
Drilling Capacity Cast Iron: 1-1/2" Dia.
restrict access or disable machine when unattended.
Coolant
7. Keep all guards and covers in place during operation.
9-1/2 qt.
Varies per Operation/Material
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
10. Always remove chuck keys and other tools before starting.
Drilling Capacity Steel: 1-3/16" Dia.
8. Clamp workpiece to table to prevent rotation.
11. Never attempt to slow or stop spindle with hands or tools.
Weight: 1026 lbs.
34.5 x 80mm
12. Use correct speeds for drilling accessories and workpiece.
9. Avoid positioning hands where they could slip into rotating bits.
23.5 x 97mm
Fluid Capacities
Date
10. Always remove chuck keys and other tools before starting.
13. Do not operate when tired or under influence of drugs or alcohol.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
11. Never attempt to slow or stop spindle with hands or tools.
14. Do not expose to rain or use in wet locations.
Component
Capacity
Type
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
S/N
32 x 35.5mm
15. Prevent unauthorized use by children or untrained users;
12. Use correct speeds for drilling accessories and workpiece.
Gearhead
4-3/4 qt.
Grizzly T23963 or ISO 32 Equivalent
restrict access or disable machine when unattended.
If
13. Do not operate when tired or under influence of drugs or alcohol.
Coolant
9-1/2 qt.
Varies per Operation/Material
14. Do not expose to rain or use in wet locations.
Specifications
15. Prevent unauthorized use by children or untrained users;
23.5 x 97mm
restrict access or disable machine when unattended.
508
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
Fluid Capacities
Full-Load Current Rating: 6.6A
Motor Speeds: 875 & 1725 RPM
32 x 35.5mm
Component
Capacity
Type
509
Swing: 27.5"
Max. Distance Spindle to Column: 13-3/4"
Gearhead
4-3/4 qt.
Grizzly T23963 or ISO 32 Equivalent
Max. Distance Spindle to Table: 30-3/4"
Coolant
9-1/2 qt.
Varies per Operation/Material
Spindle Taper: MT#4
Spindle Travel: 7"
CHECK OIL
Number of Spindle Speeds: 18
23.5 x 97mm
LEVELS BEFORE USING!
Spindle Speed Range: 60 – 1740 RPM
Vertical Table Travel: 20"
Table Swivel Around Column: 360˚
WARNING!
WARNING!
Drilling Capacity Cast Iron: 1-1/2" Dia.
32 x 35.5mm
WARNING!
Drilling Capacity Steel: 1-3/16" Dia.
Weight: 1026 lbs.
To reduce risk of death
BIOLOGICAL AND
EYE/FACE INJURY
ENTANGLEMENT
or serious injury, read
HAZARD!
HAZARD!
POISON HAZARD!
Date
manual BEFORE using
Always wear
Tie back long hair, roll up
REFER TO
machine.
Use personal protection
WARNING!
long sleeves, and remove
WARNING!
ANSI-approved safety
OWNER'S MANUAL
S/N
when handling coolant.
glasses and face shield
loose clothing, jewelry, or
To get a new manual,
FOR OIL TYPE AND
Immediately clean up
when using this
BIOLOGICAL AND
gloves to prevent getting
AMOUNT.
EYE/FACE INJURY
call (800) 523-4777 or
ENTANGLEMENT
spills.
HAZARD!
machine.
POISON HAZARD!
caught in moving parts.
HAZARD!
go to www.grizzly.com.
Always wear
Tie back long hair, roll up
506
Use personal protection
ANSI-approved safety
long sleeves, and remove
63 x 38mm
when handling coolant.
glasses and face shield
Fluid Capacities
loose clothing, jewelry, or
Immediately clean up
when using this
gloves to prevent getting
COLOR CODES
spills.
machine.
Component
Capacity
caught in moving parts.
Type
NOTICE
Gearhead
4-3/4 qt.
Grizzly T23963 or ISO 32 Equivalent
DANGER
PANTONE 485 C or RAL 3001
63 x 38mm
Coolant
9-1/2 qt.
Varies per Operation/Material
WARNING!
WARNING
PANTONE 151 C or RAL 2005
To reduce the risk of serious injury when using this machine:
WARNING!
23.5 x 97mm
Do not exceed gearbox oil level
1. Read and understand owner's manual before operating.
BIOLOGICAL AND
EYE/FACE INJURY
CAUTION
ENTANGLEMENT
PANTONE 109 C
HAZARD!
HAZARD!
above red dot in center of oil
POISON HAZARD!
WARNING!
WARNING!
2. Always wear approved safety glasses.
Always wear
PANTONE 3005 C or RAL 5005
Use personal protection
3. Only plug power cord into a grounded outlet.
site glass below.
To reduce risk of death
ENTANGLEMENT
when handling coolant.
or serious injury, read
Immediately clean up
HAZARD!
HAZARD!
4. Disconnect power before setting up or servicing.
Tie back long hair, roll up
spills.
machine.
34.5 x 80mm
machine.
long sleeves, and remove
5. Avoid entanglement with spindle—tie back long hair, roll up long
loose clothing, jewelry, or
63 x 38mm
gloves to prevent getting
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
caught in moving parts.
go to
FOR GRIZZLY MACHINES ONLY!
6. Properly set up machine before starting.
NOTICE
WITHOUT WRITTEN APPROVAL!
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
Tie back long hair, roll up
Do not exceed gearbox oil level
NOTICE
510
DANGER
ANSI-approved safety
long sleeves, and remove
9. Avoid positioning hands where they could slip into rotating bits.
glasses and face shield
loose clothing, jewelry, or
above red dot in center of oil
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
when using this
gloves to prevent getting
10. Always remove chuck keys and other tools before starting.
WARNING
manual BEFORE using
caught in moving parts.
site glass below.
11. Never attempt to slow or stop spindle with hands or tools.
GRIZZLY LOGO RED
CAUTION
To get a new manual,
ANSI-approved safety
12. Use correct speeds for drilling accessories and workpiece.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
call (800) 523-4777 or
34.5 x 80mm
glasses and face shield
when using this
www.grizzly.com.
NOTICE
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
13. Do not operate when tired or under influence of drugs or alcohol.
machine.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
NOTICE
Grizzly will not accept labels changed without approval.
DANGER
FOR GRIZZLY MACHINES ONLY!
GRIZZLY LOGO RED
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
14. Do not expose to rain or use in wet locations.
COLOR CODES
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
15. Prevent unauthorized use by children or untrained users;
WARNING
artwork changes are required, contact us immediately at
WITHOUT WRITTEN APPROVAL!
restrict access or disable machine when unattended.
Do not exceed gearbox oil level
PANTONE 485 C or RAL 3001
WARNING!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
CAUTION
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
above red dot in center of oil
PANTONE 151 C or RAL 2005
BIOLOGICAL AND
POISON HAZARD!
Do not exceed gearbox oil level
If
Always wear
site glass below.
PANTONE 109 C
Use personal protection
above red dot in center of oil
when handling coolant.
GRIZZLY LOGO RED
Immediately clean up
PANTONE 3005 C or RAL 5005
34.5 x 80mm
spills.
site glass below.
PANTONE 711C or RAL 3020
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
63 x 38mm
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
NOTICE
Grizzly will not accept labels changed without approval.
FOR GRIZZLY MACHINES ONLY!
artwork changes are required, contact us immediately at
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0793 Machine Labels A
To reduce the risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
(12/05/14)
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
MODEL G0793
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
HEAVY-DUTY DRILL PRESS
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
w/AUTO DOWNFEED & TAPPING
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
Specifications
12. Use correct speeds for drilling accessories and workpiece.
WARNING!
WARNING!
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
Full-Load Current Rating: 6.6A
15. Prevent unauthorized use by children or untrained users;
BIOLOGICAL AND
EYE/FACE INJURY
ENTANGLEMENT
Motor Speeds: 875 & 1725 RPM
restrict access or disable machine when unattended.
Swing: 27.5"
HAZARD!
HAZARD!
POISON HAZARD!
Max. Distance Spindle to Column: 13-3/4"
Always wear
Tie back long hair, roll up
Max. Distance Spindle to Table: 30-3/4"
Use personal protection
Spindle Taper: MT#4
ANSI-approved safety
long sleeves, and remove
Spindle Travel: 7"
when handling coolant.
glasses and face shield
loose clothing, jewelry, or
Number of Spindle Speeds: 18
Immediately clean up
Spindle Speed Range: 60 – 1740 RPM
gloves to prevent getting
when using this
Vertical Table Travel: 20"
spills.
Table Swivel Around Column: 360˚
machine.
caught in moving parts.
Drilling Capacity Cast Iron: 1-1/2" Dia.
Drilling Capacity Steel: 1-3/16" Dia.
Weight: 1026 lbs.
Date
S/N
NOTICE
Fluid Capacities
manual BEFORE using
Component
Capacity
Type
Do not exceed gearbox oil level
Gearhead
4-3/4 qt.
Grizzly T23963 or ISO 32 Equivalent
Coolant
9-1/2 qt.
Varies per Operation/Material
To get a new manual,
REF PART #
507
P0793507 MACHINE ID LABEL
508
P0793508 ELECTRICITY LABEL
509
P0793509 HAZARD WARNING LABEL
510
P0793510 BIOLOGICAL/POISON HAZARD LABEL
511
P0793511 ELECTRICITY LABEL
512
P0793512 GRIZZLY GREEN TOUCH-UP PAINT
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
64.5 x 148mm
COLOR CODES
DANGER
PANTONE 485 C or RAL 3001
WARNING
PANTONE 151 C or RAL 2005
• 1:1 Sizing (Labels are
CAUTION
PANTONE 109 C
105.5 x 166mm
actual size)
• 1:1 Sizing (Labels are
NOTICE
PANTONE 3005 C or RAL 5005
• Labels must be made of
actual size)
chemical-resistant material
PANTONE 711C or RAL 3020
• Labels must be made of
chemical-resistant material
If
105.5 x 166mm
105.5 x 166mm
• 1:1 Sizing (Labels are
54 x 54mm
actual size)
• Labels must be made of
CHECK OIL
chemical-resistant material
MODEL G0793
54 x 54mm
17 x 19mm
HEAVY-DUTY DRILL PRESS
CHECK OIL
REFER TO
w/AUTO DOWNFEED & TAPPING
105.5 x 166mm
LEVELS BEFORE USING!
OWNER'S MANUAL
FOR OIL TYPE AND
AMOUNT.
54 x 54mm
To reduce the risk of serious injury when using this machine:
17 x 19mm
1. Read and understand owner's manual before operating.
2. Always wear approved safety glasses.
REFER TO
3. Only plug power cord into a grounded outlet.
OWNER'S MANUAL
CHECK OIL
FOR OIL TYPE AND
4. Disconnect power before setting up or servicing.
LEVELS BEFORE USING!
AMOUNT.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
REFER TO
11. Never attempt to slow or stop spindle with hands or tools.
OWNER'S MANUAL
FOR OIL TYPE AND
12. Use correct speeds for drilling accessories and workpiece.
AMOUNT.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
WARNING!
15. Prevent unauthorized use by children or untrained users;
To reduce risk of death
restrict access or disable machine when unattended.
or serious injury, read
manual BEFORE using
machine.
54 x 54mm
To get a new manual,
17 x 19mm
64.5 x 148mm
call (800) 523-4777 or
go to www.grizzly.com.
CHECK OIL
LEVELS BEFORE USING!
64.5 x 148mm
COLOR CODES
WARNING!
DANGER
PANTONE 485 C or RAL 3001
To reduce risk of death
or serious injury, read
WARNING
PANTONE 151 C or RAL 2005
manual BEFORE using
32 x 35.5mm
REFER TO
machine.
OWNER'S MANUAL
CAUTION
PANTONE 109 C
FOR OIL TYPE AND
To get a new manual,
AMOUNT.
call (800) 523-4777 or
NOTICE
PANTONE 3005 C or RAL 5005
go to www.grizzly.com.
PANTONE 711C or RAL 3020
64.5 x 148mm
COLOR CODES
PANTONE 485 C or RAL 3001
If
.
If
PANTONE 151 C or RAL 2005
manuals@grizzly.com.
WARNING!
WARNING!
PANTONE 109 C
To reduce risk of death
EYE/FACE INJURY
ENTANGLEMENT
NOTICE
PANTONE 3005 C or RAL 5005
or serious injury, read
HAZARD!
HAZARD!
manual BEFORE using
Tie back long hair, roll up
long sleeves, and remove
machine.
PANTONE 711C or RAL 3020
loose clothing, jewelry, or
To get a new manual,
gloves to prevent getting
call (800) 523-4777 or
caught in moving parts.
go to www.grizzly.com.
64.5 x 148mm
COLOR CODES
DANGER
If
PANTONE 485 C or RAL 3001
511
manuals@grizzly.com.
WARNING
PANTONE 151 C or RAL 2005
CAUTION
PANTONE 109 C
NOTICE
PANTONE 3005 C or RAL 5005
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
34.5 x 80mm
CHECK OIL
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
LEVELS BEFORE USING!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
If
REFER TO
512
OWNER'S MANUAL
FOR OIL TYPE AND
AMOUNT.
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
105.5 x 166mm
WARNING!
To reduce risk of death
508
or serious injury, read
machine.
CHECK OIL
LEVELS BEFORE USING!
go to
REFER TO
OWNER'S MANUAL
FOR OIL TYPE AND
AMOUNT.
DANGER
54 x 54mm
17 x 19mm
WARNING
CAUTION
DESCRIPTION
Model G0793 (Mfd. Since 02/15)
Advertisement
Table of Contents
