Attaching The Viewfinder To A Camcorder - Sony BVF-C10W Operation Manual

Attaching the Viewfinder to a Camcorder

Stopper
1
Loosen the left-right positioning ring on the
camcorder.
2
Insert the slide guide which is located on the front
of the camcorder into the slide rail which is located
on the back of the viewfinder.
3
Slide the viewfinder in the direction of the arrow.
Detaching the viewfinder
To detach the viewfinder from the camcorder, conduct
the attachment procedure in reverse. When removing
the viewfinder from the camcorder, pull up the stopper.
Slide rail
Slide guide
2
Left-right positioning ring
1
4
Position the viewfinder by sliding it from side to
side, and tighten the left-right positioning ring on
the camcorder.
5
Connect the plug to the VF connector on the
camcorder.
3
4
5
Plug
VF connector
5(E)