Advertisement
Set Mode Item 48 [TX.LED]
Function: Enables/Disables the TX LED while the radio is transmitting.
Available Values: LED. ON/LED.OFF
Default: LED. ON
Set Mode Item 49 [TXSAVE]
Function: Enables/Disables the Transmitter Battery Saver.
Available Values: SAV.OFF/ SAV. ON
Default: SAV.OFF
Set Mode Item 50 [VFO.SPL]
Function: Enables or disables the "VFO Split" operation.
Available Values: VSP.OFF/VSP. ON
Default: VSP.OFF
Set Mode Item 54 [VFO.BND]
Function: Enables or disables the VFO band edge limiting for the current band.
Available Values: BAND/ALL
Default: BAND
BAND: When the VFO frequency reaches the high band edge of the current band, the VFO
frequency will jump to the low band edge of the current band (or vice versa).
ALL: When the VFO frequency reaches the high edge of the current band, the VFO
frequency will jump to the low band edge of the next band (or vice versa).
Set Mode Item 51 [WID.NAR]
Function: Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
Available Values: WIDE/NARROW
Default: WIDE
Note: If "Narrow" is selected, the receiver audio level is increased slightly to compensate for
the reduced deviation. The receiver IF filter bandwidth is not changed via this setting.
Set Mode Item 52 [WX ALT]
Function: Enables/Disables the Weather Alert Scan feature.
Available Values: ALT.OFF/ALT. ON
Default: ALT. OFF
General
Frequency Ranges:
Specifications
RX
137-174 MHz
TX 144-146(148) MHz
62/64
FCC ID: K6620223X20
IC ID: 511B-20223X20
VX-120/170 O
PERATING
Vertex Standard Co., Ltd.
M
ANUAL
Advertisement
