Advertisement
You may also recall Memory Channel #000 and Programmable Memory channels ("L01/U01"
through "L50/U50.") using the following numbers: Memory Channel #000 = "1000,"
Programmable Memory channels #L1 = "1001," U1 = "1002," L50 = "1099," and U50 =
"1100."
HOME Channel Memory
A special one-touch "HOME" channel is available, to allow quick recall of a favorite operating
frequency.
Home Channel storage is simple to accomplish:
1.
Change the setting of Set Mode Item 33: REV/HM from "REV" to "HOME," if it is not
already set to this option (see page ??).
2.
Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
3.
Press and hold in the [F/W] key for one second.
4.
While the memory channel number is blinking, just press the [REV(HOME)] key. The
frequency and other data (if any) will now be stored in the special HOME channel
register.
5.
You may repeat this process on the other operating bands.
6.
To recall the HOME channel, press the [REV(HOME)] key momentarily while operating
either in the VFO or MR mode.
Labeling Memories
You may wish to append an alpha-numeric "Tag" (label) to a memory or memories, to aid in
recollection of the channel's use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
1.
Recall the memory channel on which you wish to append a label.
2.
Press the [F/W] key, then press the [0(SET)] key to enter the Set mode.
3.
Rotate the DIAL knob to select Set Mode Item 29: NM WRT.
4.
Press the [F/W] key momentarily to display the previously stored label (if any).
5.
Press the [F/W] key again to clear any previous label.
6.
Rotate the DIAL knob to select the first digit of the desired label.
7.
Press the [F/W] key to move to the next character.
8.
If you make a mistake, press the [ ] key to back-space the cursor, then re-enter the
correct letter, number, or symbol.
VX-120/170 O
24/64
FCC ID: K6620223X20
IC ID: 511B-20223X20
M
PERATING
ANUAL
Vertex Standard Co., Ltd.
Advertisement
