Advertisement
When you initiate memory scanning, beginning on a channel with the blinking " " icon
appended, only those channels bearing the blinking " " icon will be scanned. If you initiate
scanning on a channel which does not have the blinking " " icon appended, you will scan all
channels including those with the blinking " " icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
1.
Recall the Memory Channel which you wish to add to the Preferential Scan List.
2.
Press the [F/W] key, then press the [0(SET)] key to enter the Set mode.
3.
Rotate the DIAL knob to select Set Mode Item 42: SKIP.
4.
Press the [F/W] key momentarily to enable adjustment of this Set Mode Item.
5.
Rotate the DIAL knob so as to select "ONLY."
6.
When you have made your selection, press the PTT key to save the settings and exit to
normal operation.
7.
To remove a channel from the Preferential Scan List, just repeat the above procedure,
rotating the DIAL knob to select "OFF" in step 5 above.
R.F. Says: In the factory default configuration, you may recall Set Mode Item 42: SKIP by
pressing [F/W]
[8(P2)].
To initiate Preferential Memory Scan:
1.
Press the [F/W] key, then press the [%(0)SET] key to enter the Set mode.
2.
Rotate the DIAL knob to select Set Mode Item 39: SCN MD.
3.
Press the [F/W] key momentarily to enable adjustment of this Set Mode Item.
4.
Rotate the DIAL knob so as to select "ONLY."
5.
Press the PTT key to save the settings and exit to normal operation.
6.
Now, press and hold in either the [ ] or [ ] key for one second to initiate the Preferential
Memory Scan. Only the channels which have the blinking " " icon appended to the
channel number will be scanned.
7.
To cancel the Preferential Memory Scan, just repeat the above procedure, rotating the
DIAL knob to select "MEM" in step 4 above
Memory Bank Scan
When the Memory Bank feature is engaged, the scanner sweeps only memory channels in
the current Memory Bank. However, if the Memory Bank Link Scan feature is enabled, you
may sweep the memory channels in several Memory Banks which you have selected.
To enable the Memory Bank Link Scan feature:
1.
Set the radio to the Memory mode by pressing the [MR(SKIP)] key, if necessary.
VX-120/170 O
32/64
FCC ID: K6620223X20
IC ID: 511B-20223X20
M
PERATING
ANUAL
Vertex Standard Co., Ltd.
Advertisement
