Advertisement
FCC ID: K6620223X20
IC ID: 511B-20223X20
VX-120/170 O
M
PERATING
ANUAL
EMG.C+L: The LCD/Keypad lamp flashes, and the Morse Code "SOS" (••• – – –•••) message
is transmitted on the air beginning one minute after activation of the Emergency function.
EMG.ALL: All of the above are activated.
OFF: Disables the Emergency function. The Emergency function also cannot be engaged, by
pressing and holding in the [4(RPT)] key, if this Menu is set to "OFF."
When the radio is set to the EMG.CWT, EMG.C+B, EMG.C+L, or EMG.ALL mode, the radio
will be instructed to send "DE (your callsign)" after the sending of the SOS message, if your
callsign is entered via Set Mode Item 10 [CWID].
Set Mode Item 22 [I NET]
Function: Selects the Internet Link Connection mode.
Available Values: INT.OFF/INT.COD/INT.MEM
Default: INT.OFF
INT.OFF: Disables the Internet Link Connection mode.
TM
INT.COD: Sets up the Internet Link Connection mode for WIRES
access.
INT.MEM: Sets up the Internet Link Connection mode for other (DTMF string) Internet Link
System access.
Set Mode Item 23 [INT CD]
TM
Function: Selects the Access Number (DTMF digit) for WIRES
operation.
Available Values: CODE 0 - CODE 9
Default: CODE 1
Set Mode Item 24 [INT MR]
TM
Function: Selects the memory register for an Access Number (DTMF code) for non-WIRES
Internet Link System access.
Available Values: d1 - d9
Default: d1
Set Mode Item 25 [LAMP]
Function: Selects the LCD/Keypad Lamp mode.
Available Values: KEY/CONT/OFF
Default: KEY
KEY: Illuminates the Keypad/LCD lamp for five seconds when you rotate the DIAL knob or
press the keypad or any switch (except PTT switch). This is the factory-programmed default
setting.
CONT: Illuminates the Keypad/LCD lamp continuously.
OFF: Disables the Keypad/LCD lamp.
Set Mode Item 26 [LOCK]
57/64
Vertex Standard Co., Ltd.
Advertisement
