Download Print this page

Vertex Standard VX-170 Operating Manual page 46

Hide thumbs Also See for VX-170:

Advertisement

will appear in the display for a moment.
You can change the DTMF Audodialer sending speed, using Set Mode Item 16: DT SPD.
See page ?? for details.
You can also set a longer delay between the time you press the numerical key
(corresponding to the DTMF memory string; with PTT switch pressed) and the instant when
the first DTMF digit is sent, using Set Mode Item 15: DT DLY. See page ?? for details.
Password
The VX-120/170 provides the password feature which can minimize the chance that your
transceiver could be used by an unauthorized party.
When the password feature is activated, the radio will ask for the four digit password to be
entered when the radio is first turned on. You must enter the four digit password from the
keypad. If the wrong password is entered, the microprocessor will shut down the radio
automatically.
To enter the password , use the following procedure:
1.
Press the [F/W] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL knob to select Set Mode Item 31: PSWD W.
3.
Press the [F/W] key momentarily to display any previously-stored password.
4.
Press the [F/W] key again to clear any previous password.
5.
Rotate the DIAL knob to select the first digit of the desired number/letter (0-9, A, B, C, D,
E (substitute for "*"), and F (substitute for "#").
6.
Press the [F/W] key to move to the next digit.
7.
Repeat steps 5 and 6 to program the remaining numbers/letters of the desired
password.
8.
If you make a mistake, press the [ ] key to move back to the previous digit, then
re-select the correct number/letter.
9.
If your password is made up of numbers only, you may enter your password directly from
the keypad. For example, to enter the "1234" as your password, press [1(SQ TYP)]
[2(CODE)]
[3(TX PO)]
10. When you have finished entering the password, press the PTT switch to save the new
setting and exit to normal operation.
R.F. Says: We recommend that you to write down the password number, and keep it in a safe
place you can easily find if you forget your password.
Miscellaneous Settings
[4(RPT)].
46/64
FCC ID: K6620223X20
IC ID: 511B-20223X20
VX-120/170 O
PERATING
Vertex Standard Co., Ltd.
M
ANUAL

Advertisement

loading

This manual is also suitable for:

Vx-120