Selection Of Power Supply Units - Siemens SINAMICS Series Equipment Manual

Cabinet Configuration and EMC Booksize
7.3 24 V DC supply voltage
7.3.2

Selection of power supply units

You are advised to use the devices in the following table. These devices meet the applicable
requirements of EN 60204-1.
Table 7-5 Recommended SITOP Power
Rated output current [A]
5
10
20
40
Table 7-6 Recommendation for Control Supply Module
Rated output current [A]
20
See catalog D21.2.
Warning
When an external power supply is used (e.g. SITOP), the earth potential must be connected
to the protective conductor system (PELV).
7-8
Input voltage range [V]
2AC 85-132/170 – 550
2AC 85-132/176 – 550
3AC 320 – 550
3AC 320 – 550
Input voltage range [V]
3AC 380 -10% to 3AC 480
+10% (-15% < 1 min)
DC 300 – 800
Short-circuit current [A]
5.5
30 for 25 ms
23
46
Short-circuit current [A]
< 24
Equipment Manuel for Booksize Power Modules
Manual, (GH2), Edition 06.2005, 6SL3097-2AC00-0BP2
Order number
6EP1333-3BA00
6EP1334-3BA00
6EP1336-3BA00
6EP1337-3BA00
Order number
6SL3100-1DE22-0AA0