Formatting Discs - Sony POWER HD FX PDW-700 Operation Manual

To switch the title display in the
viewfinder
When planning metadata is loaded into this unit,
you can select the format of the title to display in
the viewfinder.
See page 103 for more information about GUI
screen operations.
1
Display the Disc Menu.
2
Select "Settings", and then press the
SET/S.SEL button or the MENU knob.
3
Select "Planning Clip Name in Clip
Info. Area", and then press the SET/
S.SEL button or the MENU knob.
See page 32 for more information about the
Clip Info. Area.
4
Select one of the following, and then
press the SET/S.SEL button or the
MENU knob.
Off: Do not display a title.
ASCII Clip Name: Display the ASCII
format title (see page 92).
Clip Name: Display the UTF-8 format title
(see page 92).

Formatting discs

See page 103 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Format Disc, and then press the
SET/S.SEL button or the MENU knob.
A message appears asking you to confirm the
format.
Format Disc
All Clips, Clip Lists and
Non-AV Data (General Files)
will be Deleted.
Format OK?
3
Select OK, and then press the SET/
S.SEL button or the MENU knob.
To disable the Format Disc command
To prevent inadvertent disc formatting, resulting
in the loss of recorded data, you can disable the
Format Disc command.
See page 103 for more information about GUI
screen operations.
1
2
3
4
OK
Cancel
To cancel the format
Select Cancel, and then press the SET/S.SEL
button or the MENU knob.
To continue by formatting another disc
Exchange the disc, select OK, and then press
the SET/S.SEL button or the MENU knob.
To exit the formatting screen
Press the SET/S.SEL button or the MENU
knob with Exit selected.
Display the Disc Menu.
Select "Settings", and then press the
SET/S.SEL button or the MENU knob.
Select 'Disable "Format Disc"', and
then press the SET/S.SEL button or the
MENU knob.
Select "Disable", and then press the
SET/S.SEL button or the MENU knob.
Disc Operations 123