Sony POWER HD FX PDW-700 Operation Manual page 221

Alarm messages during thumbnail
search, scene selection, and clip list
operations
An alarm message may appear in the LCD
monitor during thumbnail search, scene selection,
and clip list operations. In that case, take the
action indicated in the following table.
Cannot The clip cannot be expanded into
Expand Clip more blocks. This alarm appears
any Further. when the DISP SEL/EXPAND
button is pressed when the number
of blocks is maximum, or when
the duration of an expanded
thumbnail is one frame.
Selected The selected essence mark does
Essence Mark not exist.
Does not This alarm appears in the essence
Exist. mark selection screen when the
specified essence mark does not
exist on the disc.
Sub Clip is The temporal relationship between
Invalid. Set the specified In and Out points in a
Appropriate TRIM operation (see page 117) is
IN/OUT not correct. Reset so that the value
Points. of the Out point timecode is larger
than the value of the In point
timecode.
Duration of The total duration of the current
One Clip List clip list exceeds the upper limit of
must be Less 24 hours as the result of an Add
than 24 Sub Clips (see page 115) or Trim
Hours. Sub Clip (see page 117) operation.
No More Sub The total number of the sub clips
Clips can be of the current clip list exceeds the
Added to the upper limit of 300 as the result of
Clip List. an Add Sub Clips (see page 115)
or Trim Sub Clip (see page 117)
operation.
Sub Clip does An attempt is made to execute a
not Exist. Move Sub Clips (see page 116),
Trim Sub Clip (see page 117),
Delete Sub Clips (see page 117),
or Set Start Time Code (see
page 118) operation with no sub
clips in the current clip list.
Clip List does An attempt is made to execute a
not Exist. Delete Clip List operation (see
page 120) when there are no clip
lists on the disc.
Move is An attempt is made to execute a
Invalid. Move Sub Clips operation (see
page 116) when there are no sub
clip in the current clip list, or when
there is only one.
Shot Mark An attempt is made to execute a
does not Delete Shot Mark (see page 106)
Exist. operation on a clip with no shot
marks recorded in.
Chapter does An attempt was made to display a
not Exist. nonexistent chapter.
Rec Start An attempt is made to delete a Rec
cannot be Start with a Delete Shot Mark
Deleted. operation. Only Shot Mark1 and
Shot Mark2 essence marks can be
deleted.
Rec Start An attempt was made to move a
cannot be Rec Start essence mark with a
Moved. Move Shot Mark operation. Only
Shot Mark1 and Shot Mark2
essence marks can be moved.
Command An attempt was made to execute
Disabled. the Format Disc command with
Disable "Format Disc" set to
"Disable".
Clip is An attempt is made to delete a
Locked. clip, set the clip thumbnail, or
delete a shot mark when the clip is
locked.
All Clips are An attempt is made to execute a
Locked. Lock All Clips operation when all
clips are already locked.
All Clips are An attempt is made to execute an
Unlocked. Unlock All Clips operation when
all clips are already unlocked.
A File with A file name that was specified in a
the Name you Set Clip Name operation already
Specified exists.
Already
Exists.
Specify a
Different
Name.
Set NAMING An attempt was made to rename a
FORM to clip with Set Clip Name when
"free" NAMING FORM is not set to
"FREE" (see page 91).
Operation Warnings 221