Sony POWER HD FX PDW-700 Operation Manual page 136

No. Page
25 SOURCE SEL
26 UMID SET
136 Menu List
Item Settings
FRONT MIC SELECT MONO/STREO
(When stereo
microphone is
connected)
REC VIDEO SOURCE CAM/EXT
(When the CBK-HD01
or CBK-SC02 option
board is installed)
EXT VIDEO SOURCE VBS/SDSDI/HDSDI
(When the CBK-HD01 (VBS is displayed when
or CBK-SC02 option the CBK-SC02 is
board is installed) installed. SDSDI and
HDSDI are displayed
when the CBK-HD01 is
installed.)
WIDE MODE(EXT) AUTO/16:9
(When the CBK-HD01
or CBK-SC02 option
board is installed)
SETUP REMOVE 0.0%/7.5%
(When the COUNTRY
item is set to
"NTSC(J)AREA" or
"NTSC AREA" and the
CBK-SC02 option
board is installed)
COUNTRY CODE Blank/up to 4 characters For details, see "Setting the
ORGANIZATION Blank/up to 4 characters
USER CODE Blank/up to 4 characters
TIME ZONE 00 to 3F
Description
Input mode selection for front
microphone.
For details, see "Recording video
from external devices" (page 93).
When the input signal is SD,
select the method that determines
whether the signal is treated as a
wide signal.
AUTO: When wide picture
information is detected in the
input signal, treat the signal
as a wide signal and set the
up-converter operating mode
to squeeze mode. Record
wide picture information
when recording SD. When
wide picture information is
not detected, set the up-
converter operating mode to
edge crop mode and do not
record wide picture
information.
16:9: Always treat the signal as a
wide signal and set the up-
converter operating mode to
squeeze mode. Record wide
picture information when
recording SD.
Selects whether to modify the
setup level of input video signals.
7.5%: Remove the setup. (Select
when signals with 7.5%
setup are input.)
0.0%: Do not remove the setup.
(Select when signals without
setup are input.)
UMID data" on page 183.