Sony POWER HD FX PDW-700 Operation Manual page 156

No. Page
20 AUTO
SHADING
21 APR
22 NETWORK
156 Menu List
Item Settings
AUTO BLK EXEC
SHADING
RESET BLK SHD EXEC
TEST OUT VBS/Y/R/G/B/
SELECT LCD
MASTER –6dB/–3dB/0dB/
GAIN(TMP) 3dB/6dB/9dB/
12dB/18dB/
24dB/30dB/
36dB/42dB
APR EXEC
APR(SLS) EXEC
APR PRESET EXEC
DHCP ENABLE/
DISABLE
IP ADDRESS xxx.xxx.xxx.xxx
192.168.1.10
SUBNET MASK xxx.xxx.xxx.xxx
255.255.255.0
DEF.GATEWAY xxx.xxx.xxx.xxx
0.0.0.0
LINK SPEED AUTO/10Mbps/
100Mbps
DUPLEX AUTO/FULL/
HALF
Description
Executes the auto black shading correction
function.
Clear black shading compensation values.
Selects the signal output of the TEST OUT
connector.
Temporarily sets the master gain value.
Suppresses white flecks by executing the automatic
pixel noise reduction function.
Suppresses white flecks in SLS (Slow Speed
Shutter) mode by executing the automatic pixel
noise reduction function.
Note
The execution time for this function is about 30
minutes. More time may be required when
temperatures inside the unit are low.
Deletes white flecks data that was added by
execution of the APR and automatic black balance
adjustment functions.
Selects whether to enable automatic acquisition of
the IP address from a DHCP server.
Sets the IP address.
Sets the subnet mask.
Sets the default gateway.
Sets the communications speed.
Sets the duplex mode.