Sony HDW-F900 Operation Manual page 95

4
Set the user bits by using the SHIFT and ADVANCE buttons.
SHIFT: Selects a digit to set. Each time you press the button, the
flashing digit moves one column to the right.
ADVANCE: Increments the value of the flashing digit.
Hexadecimal digits A to F are displayed as follows:
Hexadecimal
Display
4
Resetting a modified numeric value to 00:00:00:00
To reset a numeric value that was modified, press the RESET
button.
5
Set the F-RUN/SET/R-RUN switch to F-RUN or R-RUN,
corresponding to the desired time code run mode.
The specified user bits will be recorded for both LTC and VITC.
Storing the user bits in memory
The user bits settings are automatically retained in memory even when
the power is turned off.
4-18
Chapter 4 Adjustments and Settings for Recording
A B
A b
C D
C d
E F
E F