Sony HDW-F900 Operation Manual page 91

1
Set the AUDIO IN switch which corresponds to the channels to be
adjusted among input signals connected to AUDIO IN CH1/CH2
connectors to REAR.
To adjust channels 1 and 2, set the both AUDIO IN switches to
REAR.
2
Set the AUDIO SELECT switches corresponding to the channel
selected in step 1 to MANUAL.
4
3
Adjust the LEVEL controls corresponding to the channel selected in
step 1 so that at the maximum sound level, the level meter indicates
-20 dB. The second bar from the top may turn on occasionally, but
do not allow the top bar to go on. If it goes on, the audio level is too
high.
These bars go on.
Normal input level
4-14
Chapter 4 Adjustments and Settings for Recording
Corresponding values
0
10
20
30
40
All of the bars go
on.
Excessive input level