Sony HDW-F900 Operation Manual page 49

4 HOLD (display hold) button
Pressing this button instantly freezes the time data displayed in the
counter display section. (The time code generator continues normal
2
operation.) Pressing this button again releases the hold. One use of this
feature is to determine the exact time of a particular shot.
When the HOLD button is activated, the time data is dsiplayed in the
following format:
See Section 2-8 "Warnings and Indications on the Display Panel" (page 2-38) for
more information about the counter display.
5 RESET (counter reset) button
This button resets the time data displayed on the counter display section
to "00:00:00:00" and the user bit data to "00000000".
6 DISPLAY (LCD) switch
Depending on the settings of the F-RUN/SET/R-RUN switch and the
REAL TIME switch, this switch selects data to display in the counter
display section as follows:
CTL: Control signal
U-BIT: User bits
TC: Time code
For more information, see "Time code displays" (page 2-40).
7 ADVANCE button
For setting the time code, user bits, or real time, each press of this button
increments the flashing digit selected by the SHIFT button.
2-32
Chapter 2 Locations and Functions of Parts and Controls