To add characters
1
Push the MIC/MENU knob until the character located after the
position where you want to add a character is highlighted.
4
2
Turn the MIC/MENU knob until INS is highlighted on the character
table.
3
Press the MIC/MENU knob.
A space is placed and highlighted before the character highlighted in
step 1.
Characters after this move down one by one.
Add the desired character at the highlighted position.
4-98
Chapter 4 Adjustments and Settings for Recording
@
@
<,
A character will be added in
front of this character.
Highlight INS.
<,