Sony HDW-F900 Operation Manual page 141

PAINT menu items
This section introduces pages of the PAINT menu and items contained
on each page.
To reset all current detailed-adjusted settings and switch settings to
the reference file data
You can clear all current detailed-adjusted settings and switch settings,
and returning the settings to the standard settings (saved in the reference
file). Select STANDARD on the SCENE FILE page of the PAINT
4
menu. The message "RECALLED" is being displayed for about 3
seconds. If you do not any operation while this message is being
displayed, all current detailed-adjusted settings and switch settings and
returns the setting to the standard settings.
If you push the MIC/MENU knob while this message is being displayed,
operation is cancelled, and all current detailed-adjusted settings and
switch settings are remained as they are.
For details, refer to the Maintenance Manual.
To reset a specific item in the PAINT menu to its standard (factory)
setting on each page
Rotate the MIC/MENU knob to move the arrow ( ) to the item and
hold down the MIC/MENU knob for three seconds to reset the selected
item to its standard setting. This function operates for items that require a
precise value to be entered.
You can change the standard settings by saving the changed settings in
the reference file using the FILE menu.
4-64
Chapter 4 Adjustments and Settings for Recording