Sony HDW-F900 Operation Manual page 40

wa REMOTE (remote control) connector (8-pin)
Connect the RCP-700 Series or RM-B150 Remote Control Unit (not
supplied) with which VTR control is possible. You can also connect and
2
use the MSU-700A/750 Master Setup Unit (not supplied).
ws
Shooting and recording/playback functions (5)
ws MONITOR OUT connector (BNC type)
This connector outputs the HD video signal (75-ohm terminated, Y/P /
B
P ). To include the text on the viewfinder screen with the output signal,
R
push the DISPLAY switch to MENU while pushing the MENU switch to
CANCEL. Text output is cancelled when you turn the camcorder off,
then on again.
2-23
Chapter 2 Locations and Functions of Parts and Controls