Vermont Castings Radiance RADVT Series Installation & Operating Manual page 37

G. Operating Instructions
Turning on the stove
Pilot Safety Lockout Function
Flame Height Control
Function Operation
position to power up the system
Center or turn on wall switch to turn the
stove on
3 seconds, or turn off wall switch
Down
Turning the Stove Off
3737 Vermont Castings • Radiance RADVT Installation Manual_R20 • 09/18
Command Center Operations
Self Diagnostics Chart
you to troubleshoot problems and potentially avoid a service
Fault
NOTE: Due to the sensitive temperature monitoring
components in the transmitter, it is necessary to allow
accurate room temperatures are displayed. If the
transmitter is activated from a severe cold condition,
allow 15 minutes for accurate temperature readings to
appear on the LCD display.
Function Areas of the LCD Display
Information Bar
The information bar shows the room temperature, the
• The room temperature will always be shown after
LED Indication
Two RED every 7 seconds
Three RED every 7 seconds
Two RED, every 10 seconds
reset
WARNING
3-90-20306759