Step 2: Chargingthe Batterypack - Sony HANDYCAM HDR-HC9 Operating Manual

Step 2: Chargingthe batterypack
Battery pack
DC plug
4
To the wall outlet AC Adaptor
(wall socket) Power cord (Mains lead)
You can charge the "InfoLITHIUM"
battery pack (H series) (p, 93) after
attaching it to your camcorder,
O Notes
• You cannot am_ch any ' lnI_LITHIUM" battery
pack olhor [hall [he H SCl']es to your Cal]lCol'del'.
4
/ Attach the battery pack to your
camcorder.
Attach the baltery pack by sliding il in
tile direction of the arrow until it clicks.
2
Slide the POWERswitch to OFF
(CHG) (the default setting).
O Connect the AC Adaptor to the
DC IN jack of your camcorder. Be
sure that the • mark on the DC
plug is facing to the • mark on
your camcorder.
2
POWER
_ switch
._) _/c4a
_ _/CHG
[ : + _ ] (charge)
lamp
4
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The _,/CHG (ch_wge) hunp lights up and
charging starts. The $/CHG (charge)
lamp turns off when the battery is fully
charged.
O Notes
• Disconnect the AC Adaptor h'om d_e [)1+"IN
.i.ck holding both the cmncorder and the Dr"
plug,
"_° Tips
• gotl can operale your cat/lcorder COlllleCl_d to _1
power source such as a wall outlet (wall socket)
as shown in the illustration. The battery pack
will not lose its charge in this case.
m
_+=
g+
Continued._
13