Sony HANDYCAM HDR-HC9 Operating Manual page 103

&_ickR_m_ce
Identifyingparts and controls
The nunlbers in / ) are reference pa_es.
[]
[]
%
[]
[]
[]
[]
[]
[]
[]
[]
[] Power zuom lever (25)
[] PHOTO button (24)
[] Viewfiuder lens ac{iustn/eut lever / 18)
[] Viewfiuder/18)
[] Eyecup
[] HDMI OUT jack (Output only) (34)
• The available video signals are read, and the
appropriate output Ibrmat is selected and
outpul aulomalically.
• You call check the setup value of HDMI
OUTPUT on [STATUS CHECK] (P-59).
[] DC IN jack (13)
[] Active Interface Shoe _;,._s_0
The Active Interface Shue supplies
power to optional accessories such as a
video light, a flash, or a microphone.
The accessury can be turned on or off as
you operate the POWER switch un your
camcorder. Refer to the operating
instructions supplied with your
accessory lbr details.
• Whcll you c,onnect an acccssory, open lhe
shoe cover,
• Tile Active Interlace Shoe has a salPty
device %r fixing the installed accessory
securely. To connect an acccssory, press
down and push il lo the end, and lhen
tiglacn tile screw, To rc21Ilove all accessoly,
loosen lhe screw, and then press down all(]
pull out the accessory.
• Connecting with an external device wears
(lilt tile battery pack laster,
• Wllen you are recording movies with an
external flash (optional) connecled 1othe
accessory shoe, turn off the power of the
exlernal flash 1oprcvenl charging noi_
being recorded,
• You cannot use all external flasll (optional)
and the built-in flash at lhe same tinle.
[] POWER switch (16)
[] CAMERA-TAPE, CAMERA-
MEMORY, PLAY/EDIT mode lamps
(16)
[] ,_/CHG/charge) lamp (13)
[] § (flash) button (26)
[] START/STOP button (23)
=_
o}
N"
g
Continued._
103