Sony HANDYCAM HDR-HC9 Operating Manual page 47

N REDEYEREDUC
You can prevent redeye by activating the
flash before recording.
Set [REDEYE REDUC] tu [ON], then press
the ,_ (flash) button (p. 26) repeatedly to
select a setting.
O (Auto redeye rcductkm): Pre-flashes to
reduce redeye beibrc the flash automatically
flashes whcn lherc is insuflJcienl ambienl
light.
Q _ /Forced redeye reduction): Always uses
the flash and the rcdeye reducing pro-flash.
@/NO flash): Records without flash.
O Notes
• The rcdeye reduction may not produce the
desired ettcct due to individual diflcrcnces and
other conditions.
The picture will be recurded at a maximum
of 16 times the sensitivity of NightShot
recurdiug if you set [SUPER NS] to ION]
while the NIGHTSHOT switch (p. 27) is
also set tu ON.
S{_ and ["SUPER NIGHTSHOT"] appear
on the screen.
Tu return tu the normal setting, set [SUPER
NS] to [OFF], or set the NIGHTSHOT
switch to OFF.
O Notes
• Do not use NightShot/[SUPER NS] in brighl
places. This nmy cause a malfimclion,
• Do not cover the inliared port with your fingers
or other o[_iects (p. 105).
• Remove the conversion lens (optional) and lhe
lens hood.
• Adjusl the locus manually ([FOCUSI, p. 45)
when il is hard 1o lbcus automalically.
• The shultcr sp_d of your camcorder changes
depending on the brighmess. The molion of the
picture may slow down in this case,
When using either the NightShot (p. 27) or
[SUPER NS] (p. 47) function tu record, yuu
can record clearer pictures by setting [NS
LIGHT], which emits infrared light
/invisibleh to [ON]/the default setting).
O Notes
• Do not co_cr the inh'ared port with your lingers
or od_er objects (p. 105).
• Remove the convm:sion lens (optional) and tile
lens hood.
• The maxinmm shooting dislance using [NS
LIGHTI is about 3 m (10 lPet).
When you set [COLOR SLOW S] to [ON],
you can record an image brighter in color '_
even in dark places. _
___'_aud [COLOR SLOW SHUTTER] ==
appear uu the screen.
To cancel [COLOR SLOW S], touch
[OFF].
O Notes
• Adjust the locus manually ([FOCUS], p. 45)
when il is hard 1o locus automalically.
• The shuuer speed of your camcorder changes
depending on tile brightness. Tile motion of the
picture nmy slow down at lhis time.
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when a_/iusting the
brightness. When you change the def:mlt
selling, [] is displayed. The zebra patlern
is not recorded.
_0FF
The zchra pattern is not displayed.
7O
The zebra pattern appears at a screen
brightness level of about 70 IRE.
Continued._
47