NEC Univerge SV8100 VM8000 InMail System Manual page 76

Issue 1.0
3.
4.
5.
6.
Operation
For the outside caller:
After Automated Attendant answers, voice prompts will instruct you which digits to dial.
2 - 48
Set up the Answer Tables.
Turn to Answer Tables on page 2-29
By default, all trunks use Answer Table 1. Answer Schedule 1 is active and runs

continuously.
Set up the Call Routing Mailboxes.
Turn to Routing Mailbox on page 2-211
The active schedule (Answer Table 1, Answer Schedule 1) uses Call Routing Mailbox 000.

Set up the Dial Action Tables.
Turn to Dial Action Table on page 2-63
By default, Call Routing Mailbox 000 uses Dial Action Table 1.

Set the maximum message length for Automated Attendant callers leaving a
message in a mailbox.
47-01-03 Subscriber Message Length (Subs Msg Length)
This sets the maximum message length (1~4095 seconds) for outside
Automated Attendant callers accessing a mailbox via a LOGON or GOTO
command.
The default setting is 120 seconds.

47-01-04 Non-Subscriber Message Length (Mbox Msg Length)
This sets the maximum message length (1~4095 seconds) for outside
Automated Attendant callers leaving a message in a Subscriber Mailboxes.
The default setting is 120 seconds.

for more.
for more.
for more.
Using the Automated Attendant
VM8000
Features