Hang Up - NEC Univerge SV8100 VM8000 InMail System Manual

VM8000
Description
Hang Up is an Automated Attendant option that immediately hangs up the outside
call. When setting up a Dial Action Table, you may want to use Hang Up for unused
actions (rather than the caller hearing the standard error message). You might also
want to use the Hang Up action as the Timeout destination for callers that wait too
long to dial after the Automated Attendant answers.
Related Features
Automated Attendant
Dial Action Table
Programming
1.
Operation
Not applicable
InMail System Guide
The Automated Attendant can automatically answer the telephone system's incoming
calls, play an Instruction Menu message, and provide dialing options to callers.
The Hang Up action is a Dial Action Table option.
Assign the Hang Up action to an available Dial Action Table key.
47-13-01 VM8000 InMail Dial Action Table Actions: Hang Up Action (6) (HNGUP)
When the outside caller dials the key programmed with the Hang Up action,
the Automated Attendant immediately hangs up.
By default, the digit 9 is assigned as a Hang Up action.

Issue 1.0

Hang Up

2 - 127