Overrides - Danfoss MCX-RTU User Manual

User Guide | MCX-RTU Rooftop

Overrides

© Danfoss | ADAP-KOOL® | 2018.11
Overrides OV1 and OV2, are used to enable Night Setback and Title24 modes.
Overrides OV3 – OV8 are used to place the specific features (as shown below) in manual opera-
tion. The override value will be displayed by stage, %, OFF, ON, etc. For analog outputs a value of
zero shuts down the feature and 100 will enable 100% of the feature overridden.
OV0 Service > Over- Function
rides
OV1 Override Night- Override Night Setback – Enables Night
Setback Setback(Off/On)
OV2 Override Title24 Override Title24 – Enables Title24(Off/On)
OV3 Override Fan Override Fan(Auto/Override)
OV4 Override Fan % Sets Speed of Fan when in Override(0.0 –
100.0)
OV5 Override Dam- Override DamperAuto/
per Off/25%/50%/75%/100%)
OV6 Override Cooling Override Cooling(Auto/Off/Stg1/Stg2/
Stg3/Stg4/All On)
OV7 Override Heat Override Heat Reclaim(Auto/Off/Stg1/
Reclaim Stg2/Stg3/Stg4/All On)
OV8 Override Aux Override Aux Heat(Auto/Off/Stg1/Stg2/
Heat Stg3/Stg4/All On)
OV9 Override Time- Override Timeout – Removes override after
out so much time (0-30)
Default Units
Off
Off
Auto
0.0 %
Auto
Auto
Auto
Auto
0 m
RS8KE102 | 24