Connecting To The Wall Socket - Sony Handycam DCR-VX2100E Operating Instructions Manual

Step 1 Preparing the power
supply
What is "InfoLITHIUM?"
The "InfoLITHIUM" is a lithium ion battery
pack which can exchange data such as battery
consumption with compatible video
equipment. This unit is compatible with the
"InfoLITHIUM" battery pack (L series). Your
camcorder operates only with the
"InfoLITHIUM" battery. "InfoLITHIUM"
battery packs (L series) have the
mark.
"InfoLITHIUM" is a trademark of Sony
Corporation.
If the camcorder is immediately turned off
Even if the remaining battery time is enough to
operate, charge the battery pack fully again.
The correct remaining time is displayed.

Connecting to the wall socket

When you use your camcorder for a long time,
we recommend that you power it from the
wall socket using the AC Adaptor.
(1) Open the DC IN jack cover and connect the
AC Adaptor to the DC IN jack on your
camcorder with the plug's v mark facing
toward the LCD panel side.
(2) Connect the mains lead to the AC Adaptor.
(3) Connect the mains lead to the wall socket.
1
18
(1)
(2)
(3)
2
v